1
1-56
Setting Up the Machine for Voice
Recognition
NOTE
• If the Vocal mode is set and the phrase
for the desired function is not displayed,
say "previous page" or "next page" until
the phrase for the desired function is
displayed.
• Close the Voice Command list before
saying the phrase for the desired
function.
• If it takes time for the Voice Command
List to be displayed after saying a
command, perform microphone tuning in
[Tuning the Microphone] in [Voice
Navigation Settings] in [Accessibility] in
[Preferences] (from the Settings/
Registration screen). (See "Setting the
Maximum Volume of the Voice
Guidance," on p. 4-6.)
1