Philips S9711 Manual page 33

Problem
I replaced the
shaving heads, but
the replacement
reminder is still
showing.
A shaving head
symbol has
suddenly appeared
on the display.
An exclamation
mark has suddenly
appeared on
the display while
charging.
An exclamation
mark, replacement
reminder and the
cleaning reminder
have suddenly
appeared on the
display.
Water is leaking
from the bottom
of the shaver.
The SmartClean
system does not
work when I press
the on/off button.
Possible cause
You have not reset the
shaver.
This symbol is a
replacement reminder.
The shaver is
overheated.
The shaving heads are
soiled or damaged.
During cleaning, water
may collect between
the inner body and the
outer shell of the shaver.
The SmartClean system
is not connected to the
mains.
ENGLISH
Solution
Clean the shaver thoroughly
before you continue shaving
(see chapter 'Cleaning and
maintenance').
Reset the shaver by pressing
the on/off button for approx.
7 seconds (see chapter
'Replacement').
Replace the shaving heads
(see chapter 'Replacement').
Disconnect the shaver from the
mains for approx. 10 minutes.
Replace (see chapter
'Replacement') or clean the
shaving heads (see chapter
'Cleaning and maintenance').
This is normal and not
dangerous because all
electronics are enclosed in a
sealed power unit inside the
shaver.
Put the small plug in SmartClean
system and put the adapter in
the wall socket.
33