Table of Contents
Advertisement
Precautions for Use
As this section contains important safety-related information, be sure to read the following carefully
beforehand in order to use your projector correctly and safely.
During installation, keep the projector plug easily accessible so that the projector can be unplugged
immediately if necessary, or keep a circuit breaker within reach.
If the following situations occur, turn the power off, remove the power plug from the power outlet
and contact the Canon Customer Support Center. Failure to do so could cause a fire or result in an
electric shock.
■
If smoke is emitted
■
If an unusual smell or noise is emitted
■
If water or other liquid has entered the projector
■
If metal or any other foreign material has entered the projector
■
If the projector is knocked over or dropped and the cabinet is damaged
Pay attention to the following points for handling the power cord. Failure to do so may cause a fire,
electric shock or personal injury.
■
Do not place any objects on the power cord and do not allow it to become trapped under the
projector.
■
Do not cover the power cord with a carpet.
■
Do not modify or excessively bend, twist, pull, wind, or bundle the power cord.
■
Keep the power cord away from heaters and other sources of heat.
■
Do not use a damaged power cord. If the power cord is damaged, purchase a replacement from
your dealer.
■
The power cord included with this projector is for use exclusively with this product. Do not use
this cord for other products.
■
Be sure to connect the ground wire of the power cord to ground.
■
Be sure to connect the ground wire before connecting the power plug to the outlet. Also when
you disconnect the ground wire, be sure to unplug the power plug from the outlet beforehand.
Warning
11
Advertisement
Table of Contents
