Contents 12.1 Wired network 1 Setting up 12.2 Network settings 1.1 Read safety 13 Your photos, videos and music 1.2 Arm mounting 1.3 Tips on placement 13.1 From a USB connection or computer 1.4 Power cable 14 Specifications 1.5 Antenna cable 14.1 Environmental 2 Connections 14.2 Reception...
To find the length of the screw, add the thickness of your arm mount to the screw case you lost this guide, you can download it from www.philips.com. length. Use the product type number of the TV to look for the Quick Start Guide to download.
Although this TV has a very low standby power consumption, unplug the power cable to save energy if you do not use the TV for a long period of time. Antenna cable Insert the antenna plug firmly into the ANTENNA socket at the back of the TV.
AUDIO IN for sound, on the back of the TV. Connections Copy protection DVI and HDMI cables support HDCP (High-bandwidth Digital Content Protection). HDCP is a copy protection signal that prevents copying content from a DVD disc Tips on connections or Blu-ray Disc.
To switch off Pixel Plus Link, in the EasyLink settings menu, select Pixel Plus Link and select Off. Auto subtitle shift If you play a DVD or Blu-ray Disc on a Philips disc player that supports subtitles, the TV can move the subtitles upwards. Subtitles will be visible whatever Picture format you select.
Use 2 antenna cables to connect the antenna to the should be synchronised. Set-top box (a digital receiver) and the TV. Automatic audio to video sync With recent Philips Home Theatre Systems, the audio to video sync is done automatically synchronised and always correct. Audio sync delay...
Page 8
Professional Mode: On Enter the Professional menu. Home Menu. 2 - Select TV settings > Sound > Advanced > Audio out Audio Out offset levelling. If you cannot set a delay on the Home Theatre 3 - If the volume difference is large, select More. If System, you can set the TV to sync the sound.
Blu-ray Disc player Use a High speed HDMI cable to connect the Blu-ray Disc player to the TV. USB flash drive You can view photos or play your music and videos from a connected USB flash drive. If the Blu-ray Disc player has EasyLink HDMI CEC, Insert a USB flash drive in one of the USB you can operate the player with the TV remote connections on the TV while the TV is switched on.
press SOURCE, select USB and press OK. Your camera might need to be set to transfer its content with PTP (Picture Transfer Protocol). Read the user manual of the digital photo camera. Ultra HD on USB You can view photos in Ultra HD resolution from a connected USB device or flash drive.
Middle Remote control Key overview Note: Remote control is not included in the set. 1 - HOME To open or close the home menu. 2 - GUIDE To open or close the TV guide. 3 - ADJUST To open the Adjust menu. ...
2 - Colour keys end of use directions. Follow on screen instructions. Blue key , opens Help. 3 - Number keys and text keypad To select a TV channel directly or to enter text. Cleaning 4 - SUBTITLE To switch subtitles on, off or Automatic. Your remote control is treated with a scratch-resistant 5 - ...
channel in the channel list. 3 - Power: To switch the TV On or back to Standby. Switch on 4 - Volume: To adjust the volume level. 5 - Mute: To mute the sound or to restore it. 6 - Cleaning: Press this button(>1sec) to temporarily deactivate all eight buttons on the front On or Standby keypad.
Professional settings menu Professional mode Professional settings What you can do Dashboard This provides the selection of Default or Custom In professional mode, you can configure the TV for dashboard (i.e. Home Menu) hotel use. Features include: Professional Settings Overview •...
Page 15
Determine whether standby mode is [Fast] (regular) Control settings or [Green] (low energy). Smart power Local KB lock Enable or disable energy saving mode. Select On to lock all TV buttons except . Select [Off] or [All] to unlock or lock all buttons respectively. Wake on LAN RC lock Switch on the TV via internet if the TV is in standby.
Page 16
Define which channel to extract the time from. Only visible when Time Download is set to RF. Enable or disable the CI slot. NTP Server URL DirectShare Define which URL to extract the time from. Only Enable or disable the DirectShare feature. visible when Time Download is set to IP.
Clone/Upgrade one of four colour keys. Easily copy TV settings to a USB storage device, then MyChoice clone the settings onto another Philips TV. Enable or disable access to premium channels RF Clone Program Info (MyChoice). To set the frequency, the medium and the symbol rate of the channel for cloning via RF.
Page 18
Combine channel list This enables or disables a combined list of channels and AV sources.
Channel list TV channels Favourite channels You can create a favourite channel list that only holds the channels you want to watch. With the Favourite Watching TV channels channel list selected, you will only see your favourite channels when you switch through channels. Switch channels Create your favourite channel list 1 - Professional Mode: Off ...
Page 20
Professional Mode: On In the Professional Home number on the documentation that came with the TV or go to www.philips.com/support Menu , select Professional Settings menu and press Select Professional settings > Channel setup and press OK.
Page 21
channel (if it is analogue or digital) or a connected Options for channels device you are watching. While watching a channel, depending on the type of channel (analogue or digital) you are watching or depending on the TV settings you made, some options are available.
Page 22
Professional Mode: On Enter the Professional Text options Home Menu. 2 - Select TV settings > General settings > Menu In Text, press OPTIONS to select the following . . . language and press OK. • Freeze page 3 - Select the language you want and press OK. To stop the automatic rotation of subpages.
Page 23
To set the primary and secondary subtitle language . . impaired Some digital TV channels broadcast special audio and 1 - Professional Mode: Off Press and subtitles adapted for people who are hearing or select Setup and press OK. visually impaired.
3 - Select On and press OK. 4 - Press , repeatedly if necessary, to close the Channel installation menu. If you want to avoid access to HbbTV pages on a Update channels specific channel, you can block the HbbTV pages for this channel only.
Page 25
With Channel list copy, you can copy the channels them. installed on one TV onto another Philips TV of the same range. With Channel list copy, you avoid the time-consuming channel search by uploading a Reinstall channels predefined channel list on a TV.
Page 26
2 - Plug in the USB memory device that holds the values, the network ID or network frequency, enter channel list of the other TV. these values when the TV asks for them during 3 - To start the channel list upload, press and installation.
Page 27
steps of 1MHz. Using the 1MHz steps will take more Predefined symbol rates time to search for and install channels. With the Symbol rate mode set to Automatic, the TV will use 1 of the predefined symbol rates as used by most cable providers in your country.
Page 28
Select your country or the part of the world where you are now. • Search channel To find a channel, select Search channel and press OK. Select Search and press OK. You can also enter a frequency yourself. If the reception is poor, press Search again.
Home menu From the Home menu, you can start any activity you can do with the TV. Open the Home menu to start watching TV or start watching a disc on your Home Theatre System. Open the Home menu 1 - To open the Home menu, press . 2 - Select an activity using the arrow keys and press OK to start the activity.
Channel settings Settings In the Channel settings menu, you can set your language preferences or switch on the Universal access for people who are hearing and visually impaired. You can set an age rating to prevent Setup menu children from watching a rated programme and set or change your Child lock code.
Page 31
Picture style Picture settings For easy picture adjustment, you can select a preset Colour setting with Picture style. With Colour, you can adjust the colour saturation of 1 - While watching a TV channel, press OPTIONS to the picture. open the Options menu. To adjust the colour .
Page 32
one of the presets in this menu. Colour enhancement 6 - Press , repeatedly if necessary, to close the menu. With Colour enhancement, you can enhance the colour intensity and the details in bright colours. To adjust the level . . . Contrast settings 1 - Professional Mode: Off ...
Page 33
4 - Press , repeatedly if necessary, to close the Contrast > Brightness. 3 - Press (right) and adjust the value menu. with (up) or (down). 4 - Press , repeatedly if necessary, to close the menu.
4 - Press , repeatedly if necessary, to close the select Setup and press OK. Professional Mode: On Enter the Professional menu. Home Menu. 2 - Select TV settings > Sound > Sound style and select the style you want to reset. Location ...
Page 35
select Setup and press OK. Headphones volume Professional Mode: On Enter the Professional Home Menu. With Headphones volume, you can set the volume of 2 - Select TV settings > Sound > Advanced > TV a connected headphones separately. speakers.
Audio Out delay Hearing impaired If you set an Audio sync delay on your Home Theatre Switch on System, to synchronise the sound with the picture, you must switch off Audio Out delay on the TV. Digital TV channels can broadcast special audio commentary describing what is happening on screen.
Page 37
Audio effect Some audio commentary can hold extra audio effects, like stereo or fading sound. To switch on Audio effects (if available) . . . 1 - Press and select Setup and press OK. 2 - Select Channel settings > Languages > Audio description >...
Change day TV guide The TV guide can show scheduled programmes for the upcoming days (maximum up to 8 days). If the TV guide information comes from the What you need broadcaster, you can pres CH to view the schedule of one of the next days.
the TV in standby. To only switch on the HTS, with the TV in standby, Sources press SOURCE on the TV remote control. 10.1 Sources list In the list of connections - the Source menu - you can find the devices connected to the TV. From this Source menu, you can switch to a device.
4 - Press , repeatedly if necessary, to close the menu. Timers and clock 11.3 11.1 Switch off timer Sleeptimer If you do not press a key on the remote control during With the sleep timer, you can set the TV to switch to a 4 hour period, or if the TV receives no input signal standby automatically after a preset time.
With Clear Internet memory, you can clear all Internet 5 - Select Wired and press OK. files stored on your TV. You clear your Philips Smart The TV constantly searches for the network TV registration and parental rating settings, your connection.
Page 42
your TV. These files will also be cleared.
Sorting Your photos, videos To browse your photos by date, month, year or alphabetically by name, press Sort . To browse your music by album, artist, genre or and music alphabetically by name, press Sort . Videos are sorted alphabetically. 13.1 From a USB connection or View photos...
Page 44
To close Browse USB, press and select another keys several times to speed up - 2x, 4x, 8x, 16x, 32x. To stop the music playback, press (Stop). activity. If you press , the music keeps on playing. Info To view song info (title, artist, duration, etc.), select the song and press INFO.
On the label, you can find the energy efficiency class, the average power consumption of this product in use and the average energy consumption for 1 year. You can also find the power consumption values for this product on the Philips website for your country at www.philips.com/TV...
5.5 cm / 2.2 inches from the back of notice. For more specification details of this product, the TV. www.philips.com/support Before you mount the TV on the wall, find the correct Power length of the screw. To find the length of the screw, •...
At the end of the update, the message Operation This is a document describing the distribution of the successful appears on screen. Remove the USB source code used on the Philips TV, which fall either memory device and press on the remote control.
Page 49
FOR A PARTICULAR PURPOSE, REGARDING THIS Source: SOFTWARE. Philips offers no support for this http://sourceforge.net/projects/libmng/files/ software. The preceding does not affect your warranties and statutory rights regarding any Philips u-Boot loader (1.3.4) product(s) you purchased. It only applies to this Used by boot loader and only linked with boot source code made available to you.
Page 50
DirectFB include SAWMAN (1.4.0) This piece of software is made available under the It is a software library for GNU/Linux/UNIX based terms and conditions of the glibc license, which can operating system with a small memory footprint that be found below. provides graphics acceleration, input device handling Source: http://www.gnu.org/software/libc/ and abstraction layer, and integrated windowing...
Page 51
Driver license, which can be found below. e2fsprogs (1.41.14) Source: http://www.tuxera.com e2fsprogs provides the filesystem utilities for use with the ext2 filesystem, it also supports the ext3 and ext4 WPA Supplicant (0.5.10 & 0.6.7) filesystems. These packages are used to provide WiFi access.The This piece of software is made available under the supplier for these tools is Atheros.These pieces of terms and conditions of the e2fsprogs license, which...
Page 52
These are the core utilities which are expected to multiple highlights and forms characters and function- exist on every operating system. key mapping, and has all the other SYSV-curses Source: http://www.gnu.org/software/coreutils/ enhancements over BSD Curses. Source: http://www.gnu.org/software/ncurses/ findutils (4.2.31) The GNU Find Utilities are the basic directory net-tools (1.6) searching utilities of the GNU operating system.
Page 53
Advanced Encryption Standard (AES) is a Source: http://jquery.com/ specification for the encryption of electronic data. Used inside Philips libraries. Libupnp (1.2.1) Source: http://gladman.plushost.co.uk/oldsite/AES/ The Linux* SDK for UPnP* Devices (libupnp) provides developers with an API and open source code for microhttpd (libmicrohttpd-0.9.9.tar.gz)
Page 54
In our project, Bonjour is used for the automatic discovery of devices and services Source: http://developer.apple.com/bonjour/...
A commercial banner appears The TV goes back to standby after showing the Philips startup screen Make sure that [Location] is set to [Home]. When the TV is in standby, a Philips startup screen is Picture does not fit the screen...
No sound or poor sound quality If no audio signal is detected, the TV automatically To solve any Philips TV related problem, you can switches the audio output off — this does not indicate consult our online support. You can select your malfunction.
TV. from the power outlet immediately. Risk of swallowing batteries ! Contact Philips TV Consumer Care to have the TV checked before use. The remote control may contain coin-type batteries • Never expose the TV, remote control or batteries to which can easily be swallowed by small children.
Risk of hearing damage Avoid using earphones or headphones at high volumes or for prolonged periods of time. Low temperatures If the TV is transported in temperatures below 5°C or 41°F, unpack the TV and wait until the TV temperature reaches room temperature before connecting the TV to the power outlet.
TP Vision is the warrantor in relation to long as its products are handled properly for their the TV with which this booklet was packaged. Philips intended use, they are safe to use according to and the Philips Shield Emblem are registered scientific evidence available today.
Page 60
trademarks of Oracle and/or its affiliates, in the United DTS 2.0 + Digital Out ™ States and other countries. Microsoft DTS 2.0 + Digital Out™ Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 and other U.S. and worldwide patents issued and pending. DTS, the Windows Media Symbol, and DTS and the Symbol together are Windows Media is either a registered trademark or...
Page 61
Other trademarks All other registered and unregistered trademarks are the property of their respective owners.