Table of Contents
Advertisement
7 Play with
Bluetooth
device
You can make or receive phone calls with
Bluetooth-enabled phones through the unit.
You can also listen to music from a Bluetooth-
enabled device.
Adjust microphone position
For better sound quality in make/receive phone
call through Bluetooth, place the microphone
near the mouth.
1
Make sure the supplied microphone is
connected to the car audio system. (See
"Connect wires" section).
2
Place the microphone at a proper location.
For example,
‡
Stick it onto the dashboard.
‡
Or, clip it on the sun-shield.
Pair the Bluetooth-enabled
devices
To connect your Bluetooth device to the car
audio system, you need to pair the device to
the system. Pairing needs only to be done once.
You can pair up to eight devices.
Note
‡
The operational range between this unit and a
Bluetooth device is approximately 10 meters (30 feet).
Turn on the Bluetooth function on the device.
‡
Before you connect a Bluetooth device to this unit,
familiarize yourself with the Bluetooth capabilities of
the device.
‡
Compatibility with all Bluetooth devices is not
guaranteed.
‡
Any obstacle between this unit and a Bluetooth device
can reduce the operational range.
‡
Keep this unit away from any other electronic device
that may cause interference.
1
Turn on the Bluetooth function on the
device.
2
Search for Bluetooth device with the
device.
3
Select "CID2780" in the pairing list.
4
Enter default password "0000".
» iI the pairing succeeds. the phone call
record is displayed.
Use the car audio for pairing
Beside using your Bluetooth device to search
for the car audio system, you can also use
the car audio system to search for available
Bluetooth devices.
1
Turn on the Bluetooth function on your
Bluetooth device.
2
On the car audio system, tap
.
» The system starts searching for
available Bluetooth devices.
>
>
EN
23
Advertisement
Table of Contents
