Table of Contents
Advertisement
Maintenance and cleaning
Spray arms
Check whether or not the holes for the upper and lower spray arms are clogged. If
there is any clogging, remove the spray arms and clean them under water.
You can remove the lower spray arm by pulling it upwards, while the upper spray arm
nut can be removed by turning the nut to the left.
Be sure that the nut is correctly tightened when refitting the upper spray arm.
Hose filter
The inlet hose filter helps to avoid any damage to your machine due to any
contamination (sand, clay, rust etc.) that might be occasionally carried in through
the mains water supply or the indoor plumbing, and to reduce such problems as
yellowing and formation of deposits after washing. Check the filter and the hose from
time to time and clean them if necessary. To clean the filter, first turn off the tap and
then remove the hose. After removing the filter from the hose, clean it under the tap.
Insert the cleaned filter back into its place inside the hose. Refit the hose.
39
Advertisement
Table of Contents
