D-Link 0790069438448 User Manual page 25

Section 3 - Configuration
MAC Address The default MAC address is set to the physical interface MAC address
of port 1 on Covr Point A. You can use the drop-down menu to replace
Clone:
the Internet port's MAC address with the MAC address of a connected
client.
If you selected Static IP as the Address Mode:
IP Address:
Enter the IP address provided by your ISP.
Service Name:
Enter the ISP service name (optional).
Primary DNS
Enter the primary DNS server IP address assigned by your ISP.
Server:
Secondary DNS Enter the secondary DNS server IP address assigned by your ISP.
Server:
MTU: Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your ISP.
MAC Address The default MAC address is set to the physical interface MAC address
Clone: of port 1 on Covr Point A. You can use the drop-down menu to replace
the Internet port's MAC address with the MAC address of a connected
client.
Click Save when you are done.
D-Link COVR-C1203 User Manual
PPPoE (continued)
21