Related Manuals for Philips 240B9/01
Summary of Contents for Philips 240B9/01
- Page 1 B Line 240B9 241B8 www.philips.com/welcome EN User manual Customer care and warranty 21 Troubleshooting & FAQs...
-
Page 2: Table Of Contents
6.1 Resolution & Preset Modes ..19 7. Power Management ....20 8. Customer care and warranty .. 21 8.1 Philips’ Flat Panel Monitors Pixel Defect Policy ..... 21 8.2 Customer Care & Warranty ..24 9. Troubleshooting & FAQs ..25 9.1 Troubleshooting ...... -
Page 3: Important
DC power cord for normal operation. 1.1 Safety precautions and • Please use approved power cord maintenance provided by Philips all the time. If your power cord is missing, please Warnings contact with your local service Use of controls, adjustments or center. - Page 4 1. Important degrees. If the -5 degree downward use it for a longer lifetime, please tilt angle maximum is exceeded, the use the monitor in a location monitor damage will not be covered that falls within the following under warranty. temperature and humidity ranges.
-
Page 5: Notational Descriptions
1. Important in Regulation & Service Information 1.2 Notational Descriptions Manual.) The following subsections describe • For transportation information, notational conventions used in this please refer to “Technical document. Specifications”. • Do not leave your monitor in a car/ Notes, Cautions and Warnings trunk under direct sun light. -
Page 6: Disposal Of Product And Packing Material
From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled. At Philips, end- of-life management primarily entails This marking on the product or on participation in national take-back... -
Page 7: Setting Up The Monitor
This product has been manufactured by and is sold under the responsibility of Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. - Page 8 2. Setting up the monitor Connecting to your PC 3. Connect the monitor signal cable to the video connector on the back of your computer. Fast Charger 4. Plug the power cord of your computer and your monitor into a USB UP nearby outlet.
-
Page 9: Operating The Monitor
What is On-Screen Display (OSD)? Description of the control buttons On-Screen Display (OSD) is a feature in all Philips LCD monitors. It allows an end user to adjust screen performance or select functions of the monitors directly through an on-screen instruction window. - Page 10 2. Setting up the monitor Resolution notification Main menu Sub menu PowerSensor 0, 1, 2, 3, 4 This monitor is designed for optimal performance at its native resolution, LowBlue Mode 1, 2, 3, 4 1920 x 1200. When the monitor is powered on at a different resolution, an Input alert is displayed on screen: Use 1920 x...
-
Page 11: Remove The Base Assembly For Vesa Mounting
2. Setting up the monitor Height adjustment 2.3 Remove the Base Assembly for VESA Mounting Before you start disassembling the monitor base, please follow the instructions below to avoid any possible damage or injury. 1. Extend the monitor base to its maximum height. - Page 12 2. Setting up the monitor Note This monitor accepts a 100mm x 100mm VESA-Compliant mounting interface. VESA Mounting Screw M4. Always contact manufacturer for wall-mount installation. 100mm 100mm 0° 90° -5° * Display design may differ from those illustrated. Warning • To avoid potential screen damage, such as panel peeling, ensure that the monitor does not tilt downward...
-
Page 13: Image Optimization
How does it work? SmartImage is an exclusive, leading edge Philips technology that analyzes the content displayed on your screen. • EasyRead: Helps improve reading Based on a scenario you select, of text based application like PDF SmartImage dynamically enhances the ebooks. -
Page 14: Smartcontrast
• Off: No optimization by SmartImage. Note Philips LowBlue mode, mode 2 compliance with TUV Low Blue Light certification, you can have this mode by simply press the hotkey , then press to select LowBlue Mode, see above SmartImage selection steps. -
Page 15: Powersensor
4. PowerSensor™ detection signal for distances up to 4. PowerSensor™ 120 cm or 47 inches. (Setting 4) • Since some dark colored clothing How does it work? tends to absorb infrared signals even when the user is within 100 cm • PowerSensor works on principle or 40 inches of the display, step up of transmission and reception of... - Page 16 4. PowerSensor™ Note A manually selected PowerSensor mode will remain operational unless and until it is readjusted or the default mode is recalled. If you find that the PowerSensor is excessively sensitive to nearby motion for some reason, please adjust to a lower signal strength. Keep sensor lens clean, if the sensor lens is dirty, wipe it with alcohol to avoid reducing of distance detection .
-
Page 17: Designs To Prevent Computer Vision Syndrome (Cvs)
• Reposition your screen to appropriate height and angle syndrome (CVS) according to your height. 4. Choose Philips monitor for easy-on- Philips monitor is designed to prevent eyes. eye strain caused by prolonged computer use. • Anti-glare screen: Anti-glare... -
Page 18: Technical Specifications
6. Technical Specifications 6. Technical Specifications Picture/Display Monitor Panel Type IPS Technology Backlight W-LED Panel Size 24.1" W (61.1 cm) Aspect Ratio 16:10 Pixel Pitch 0.270 (H) mm x 0.270 (V) mm Contrast Ratio(typ.) 1000:1 Optimum Resolution 1920 x 1200 @ 60 Hz Viewing Angle 178°... - Page 19 6. Technical Specifications Power AC Input AC Input AC Input Consumption Voltage at Voltage at Voltage at 100VAC , 50Hz 115VAC , 50Hz 230VAC, 50Hz Normal Operation 20.1 W (typ.) 20.0 W (typ.) 19.9 W (typ.) Sleep (Standby mode) 0.3 W 0.3 W 0.3 W Off mode...
- Page 20 6. Technical Specifications Environmental and energy ROHS Packaging 100% recyclable Specific Substances 100% PVC BFR free housing Cabinet Color Black Finish Texture Note 1. This data is subject to change without notice. Go to www.philips.com/support to download the latest version of leaflet.
-
Page 21: Resolution & Preset Modes
6. Technical Specifications 6.1 Resolution & Preset Modes Maximum Resolution 1920 x 1200 @ 60 Hz (VGA/DVI) 1920 x 1200 @ 75 Hz (HDMI/DP) Recommended Resolution 1920 x 1200 @ 60 Hz H. freq Resolution V. freq (Hz) (kHz) 31.47 720 x 400 70.09 31.47... -
Page 22: Power Management
7. Power Management 7. Power Management If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically. -
Page 23: Customer Care And Warranty
Pixel Defect Policy single black pixel. Other combinations of lit and dark sub pixels appear as Philips strives to deliver the highest single pixels of other colors. quality products. We use some of the industry's most advanced... - Page 24 Black Dot Defects the warranty period, a TFT Monitor Black dot defects appear as pixels or panel in a Philips flat panel monitor sub pixels that are always dark or 'off'. must have pixel or sub pixel defects That is, a dark dot is a sub-pixel that...
- Page 25 8. Customer care and warranty BRIGHT DOT DEFECTS ACCEPTABLE LEVEL 1 lit subpixel 2 adjacent lit subpixels 3 adjacent lit subpixels (one white pixel) Distance between two bright dot defects* >15mm Total bright dot defects of all types BLACK DOT DEFECTS ACCEPTABLE LEVEL 1 dark subpixel 5 or fewer...
-
Page 26: Customer Care & Warranty
Please contact our Philips Customer Service Representative or local contact center (by Consumer care number) for more details. Philips Customer Care Center number listed below. -
Page 27: Troubleshooting & Faqs
• Contact with Philips customer • First, ensure that the power button service representative immediately. on the front of the monitor is in the... -
Page 28: General Faqs
Service contact information listed in known as "after-imaging" or "ghost Regulation & Service Information Manual imaging", on your screen. "Burn-in", and contact Philips customer service "after-imaging", or "ghost imaging" representative. is a well-known phenomenon in * Functionality different according to LCD panel technology. - Page 29 Ans.: In general it is recommended disconnect your old monitor and that the panel surface is not reconnect your Philips LCD monitor. subjected to excessive shocks • Turn on your monitor and then turn and is protected from sharp or on your PC.
- Page 30 PC, workstation or Mac? a periodic screen refresh application may result in severe “burn-in” or “after- Ans.: Yes. All Philips LCD monitors are image” or “ghost image” symptoms fully compatible with standard that will not disappear and cannot be PCs, Macs and workstations.
- Page 31 9. Troubleshooting & FAQs Q14: Where can I find Regulation & Service Information Manual mentioned in EDFU? Ans.: Regulation & Service Information Manual can be download on the Philips website support page.
- Page 32 This product has been manufactured by and is sold under the responsibility of Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are regis- tered trademarks of Koninklijke Philips N.V. and are used under license.