Toshiba RKP002Z Instruction Manual page 4

Toshiba power supply instruction manual
Hide thumbs Also See for RKP002Z:
Table of Contents

Advertisement

Operations
Do not apply a dropping shock or other physical shocks.
Otherwise, damage or malfunction will result.
Prohibited
Do not pull on the cable and connector
It may cause damage or error.
Even if this product is deactivated by an unusual event such as tripping, an operating
error, power outage, etc. do not bring any regions of your body into contact with the
inverter terminals when power is supplied to the inverter. Contact during the power-on
status of the inverter can result in electric shock.
Use an additional safety device with your inverter or system to prevent a serious
accident due to the unit malfunctions. Usage without an additional safety device may
Mandatory
cause an accident.
Make sure to check that the parameter data from this product is not accidently copied to
the wrong inverter.
Usage with wrong parameter may result in an accident.
▼ Set up "Communication error trip time (
manual for details)" to stop the inverter when Remote Keypad is deactivated by an
unusual event such as tripping, an operating error, power outage, failure, etc.
Mandatory
Deactivated Remote Keypad may cause an accident, if the "Communication error trip
time" is not properly set up.
Disposal
If you dispose off this unit, have it done by a specialist in industrial waste disposal*.
Improper disposal may result in explosion of capacitors or produce noxious gases,
Mandatory
resulting in injury.
(*) Persons who specialize in the processing of waste and known as "Industrial Waste
Product Collectors and Transporters" or "Industrial Waste Disposal Persons." If the
collection, transport and disposal of industrial waste is done by someone who is not
licensed for that job, it is a punishable violation of the law (Laws in regard to cleaning
and processing of waste materials).
Notes on operation
Avoid installing in a place where ambient temperature or/and humidity change sharply.
Keep the transmission cable separate from the power cable of the inverter to prevent
the inverter from malfunctioning due to electromagnetic noise.
It is recommended to
remote operation panel. Improperly installed units may result in damage and
malfunction.
The integrity of data storage is guaranteed for up to 10 years.
The operating life of EEPROM (data storage device) is 10000 operations.
Do not execute more than 10000 writing operations.
Do not turn off power or remove the connection cable between the inverter and Remote
Keypad while a copying operation is in progress. If the inverter power is turned off or the
connection cable is removed while parameters are being copied, data cannot be written
correctly.
Do not copy data from Remote Keypad to inverter while the inverter is running. Some of
the parameters cannot be written when the inverter is in operation.
When a copying operation is executed between two inverters with different capacities,
some of the parameters that vary with the capacity of the inverters will also be copied.
Therefore, when copying the parameters between inverters with different capacities or
voltage class, the type information parameters of the inverter should always be
initialized. See the inverter instruction manual on how to initialize their parameters.
Danger
Warning
f803, f804
Warning
Notes
install the unit on the panel board of a cabinet if it is used as a
- 3 -
E6581277
, see the inverter instruction

Advertisement

Table of Contents
loading

Table of Contents