Product Installation; Using In Horizontal Position; Using In Vertical Position; Mounting On The Back Of The Monitor - LG CBV42 Owner's Manual

Product Installation

Using in Horizontal Position

NOTE
If this product is used with upside down, it
y
may not work properly.
Use the product with the Kensington lock
y
facing upward.

Using in Vertical Position

1
Firmly attach the stand on the bottom of the
product as illustrated below.
2
Using a coin, turn the screw clockwise to
secure the stand base.
NOTE
Attach the stand
y
base to the
stand hinge with
its front part fac-
ing forward.
ASSEMBLING AND PREPARING
Mounting on the Back of the
Monitor
1
Fix the mount bracket on the back of the
monitor with 4 screws as illustrated below.
2
Put the product on the two latches as illustrated
below.
Assemble the product by aligning the below
two holes out of 4 holes on the product.
CAUTION
The product may not be mounted on some
y
monitors with mount bracket.
- In this case, use the product in horizontal
or vertical position.
When connecting the peripherals after
y
mounting the product on the monitor, be
sure to hold the product.
5