Epson LabelWorks PX User Manual page 24

Creating Labels to Wrap Around Cable
You can repeatedly print text so that it can be seen
regardless of the angle from which the cable is viewed.
Label length
Margin Margin
1. Press .
2. Select the length type with
.
In this example, we will select "Length".
Dia: Sets the length by cable diameter.
(Setting range: 0.25 to 15 cm)
Length: Sets the length by label length.
3. Enter the label length and then press
Setting range: 1 to 99.9cm
Tape width
/ and then press
.
Creating Special Labels
4. Select On or Off of repeat text with
then press .
In this example, we will select "On".
On
Off
5. Select the type of margins with
press .
In this example, we will select "Long".
Tape/3: Sets margins that are a 1/3 of the tape width.
Tape: Sets margins that are equal to the tape width.
6. Enter the text.
7. Press .
Top
Safety Instructions
Specifications
Troubleshooting
Part Names and
Functions
Start Here
/ and
Cleaning
Initializing the
Settings
Purpose-based Index
/ and then
Key Menu Index
Frame and Table Lists
24