Figure 8-13 Wall Mount Spacing Guide Bch-L (Bk) Unit; Figure 8-14 Installing Wood Screws - NEC UNIVERGE SV8100 System Hardware Manual

UNIVERGE SV8100/SV8300
System Hardware Manual
Clearances required for installing the Bluetooth cradle are shown
below. Avoid mounting the cradle on a plaster-board wall, but before
mounting the cradle on a wall, check that the wall can withstand the
weight of the telephone and the load from pulling the telephone during
operation.

Figure 8-13 Wall Mount Spacing Guide BCH-L (BK) UNIT

1. Attach two wood screws to the wall.
Keep a clearance of about 0.08" (2mm) between each wood screw and
the wall (refer to

Figure 8-14 Installing Wood Screws

Figure 8-14 Installing Wood Screws on page
Issue No. 1.5
8-11).
8 - 11