Residual Risks - Bosch Rexroth HQ 5/H Assembly Instructions Manual

Table 8: Residual risks
Location
1
Between workpiece
pallet and lateral guide.
2
Between workpiece
pallet and damper/stops.
3
Between workpiece
pallet and transverse
conveyor module /
rollers.
4
Between workpiece
pallet and stop gate latch
during approach
5
When lowering:
between workpiece
pallet and stop gate
6
When lowering:
between workpiece
pallet and stop gate
7 When lowering: between
workpiece pallet and
protective covers.
The lift transverse unit is not designed for use in work areas.
Further constructive measures are to be taken by the user for its use in work areas.
3

8.2 Residual risks

Situation Danger
Body parts can become
trapped
Body parts can become
trapped
Body parts can become
trapped
Body parts can become
trapped
Body parts can become
trapped
Body parts can become
trapped
Body parts can become
trapped
1, 2
557 617-17
Action
Do not reach into the running system.
Crushing
Safety measure required:
e.g. safety guard.
Do not reach into the running system.
Crushing
Safety measure required:
e.g. safety guard.
Do not reach into the running system.
Crushing
Safety measure required:
e.g. use protective covers (See page 25).
Pre-separate before work areas.
Crushing
Do not reach into the running system.
Danger zone is to be marked.
Do not reach into the running system.
Crushing
Danger zone is to be marked.
Do not reach into the running system.
Crushing
Safety measure required:
e.g. safety guard.
Do not reach into the running system.
Crushing
Safety measure required:
e.g. safety guard.
3 842 558 544/2017-07, MIT: HQ 5/H, HQ 5/XH, Bosch Rexroth AG
Start-up 35/60
4, 5, 6
7
557 617-18