And %- Preset Rate Setting - Toshiba MA-600 Programming Manual

6. TERMINAL FILE PROGRAMMING
6.26

%+ and %- Preset Rate Setting

A preset rate may be set on each of the [%+] and [%-] keys, one independent rate for each key. Once a rate is
preset, the % key will simply be depressed without a prior rate entry to activate the preset rate. If a rate is
entered prior to the depression of the key, the entered rate (manual rate) will be activated instead.
Any time outside a sale
CONDITION
OPERATION
Mode Lock: SET
1) Menu Tree
2) Operation Flowchart
Depress [↓] three times then [Enter].
Depress the [1] or [Enter] key.
Select a [%] key to be programmed
NOTE: When inputting 0, the % preset rate will be cancelled. If doing so, the % preset rate should be set in the
registration operation.
Main Menu
or
Depress [4].
with the [↓] key.
[Enter]
Input a Preset Rate.
[End]
ECR is being outside a sale and in SET mode.
"4 RATE, LIMIT AMOUNT" is selected.
"1 %- RATE (%-/%+)" is selected.
To select [%-] key, depress [1] or [Enter].
To select [%+] key, depress [2] or depress [↓] then [Enter].
0,001 to 99,999 (%): Use the [.] key if decimal portion is contained.
(See NOTE below.)
This setting is ended. A long receipt is issued and the display
returns to Main Menu screen.
6-128
EO3-11106
6.26 %+ and %- Preset Rate Setting