Transport - Silvercrest SMK 41 A2 Operating Instructions Manual

 WARNING! Do not operate electrical devices inside the cooling
chamber that do not conform to the design recommended by the
manufacturer.
 WARNING! Do not use any mechanical devices or means to
accelerate defrosting other than those recommended by the
manufacturer.
 Keep away from open flames.
 Tampering with the refrigerant circuit is prohibited and invalidates
the warranty.
WARNING!
Risk of fire!
There are flammable liquids in the coolant circuit and the
compressor.
 Note the fire hazard warning signs on the back of the appliance or
the compressor.
 Avoid open flames and ignition sources when using, maintaining
and disposing of the appliance.

3.2. Transport

NOTICE!
Possible material damage!
Risk of damage to the appliance if transported incorrectly.
 Ensure that no part of the refrigerant circuit is damaged when
transporting and installing the appliance.
 Where possible, always transport the appliance upright. If tilted
to an angle of more than 40° during transport, wait 4 hours
before connecting it to the mains and switching it on to enable the
refrigerant circuit to settle after transport.
 Do not store or transport the appliance on its side or back, as
this can cause oil from the compressor to enter and block the
refrigerant circuit.
 Do not expose the appliance to rain or spray water.
English -43