3.2.2. Warm reset
3.2.2.1. Warm reset by RESET_N pin
When resetting with the RESET_N pin, set the RESET_N pin to "Low" for at least 17.2 μs or more while the
power supply voltage is within the operating range.
When the "Low" period of a RESET_N pin is longer than "Internal processing time", after a RESET_N pin
changes to "High", Internal reset is released after "CPU waiting time" elapsed.
When the "Low" period of a RESET_N pin is shorter than "Internal processing time", after internal reset is
extended and from a RESET_N pin changes "Low", Internal reset is release after "Internal processing time" +
"CPU waiting time" has elapsed, internal reset will be released.
DVDD5
Operation Voltage range
When RESET_N pin reset time is longer than internal processing time (t
RESET_N pin
Internal reset
When RESET_N pin reset time is less than internal processing time (t
RESET_N pin
Internal reset
3.2.2.2. Warm reset by internal reset
In case of reset asserted by internal factors, such as SIWDT, OFD, LVD, LOCKUP, and <SYSRESETREQ>,
Internal reset is released after "Internal processing time" + "CPU waiting time" elapsed.
)
IRST
t
Internal processing time(
)
IRST
)
IRST
t
Internal processing time(
)
IRST
Figure 3.5 Warm reset action
65 / 72
Clock Control and Operation Mode
DVDD5 = DVDD5A = DVDD5B = AVDD5
CPU waiting time(
CPU Operation start
t
CPU waiting time(
)
CPUWT
TXZ+ Family
TMPM3H Group(1)
CPU Operation
start
t
)
CPUWT
2022-05-10
Rev. 1.3