Table of Contents
Advertisement
FusionCol8000-E240 Modular Indirect Evaporative
Cooling System
User Manual
Figure 5-28 Connecting power cables
Figure 5-29 Fill the holes with sealing putty
(1) Paper protective film
----End
5.6 Installing an Air Deflector
Procedure
Step 1 Assemble an air deflector.
Issue 03 (2021-04-20)
NO TE
After the power cables are connected and confirmed, use sealing putty to fill the gap
between the cables and the cabinet (as shown in the two holes in the preceding figure).
You can obtain sealing putty from the fittings bag. The following figure shows how to fill a
gap using sealing putty.
Copyright © Huawei Digital Power Technologies Co., Ltd.
5 System Installation (FDC Scenario)
(2) Sealing putty
93
Advertisement
Table of Contents
