Electrolux E3GS1-13MN Manual page 5

Before filling the water tank, disconnect the power supply.
Step 1 Hold the water tank handle and lift it up.
Step 2 Unscrew the water tank cover.
Step 3 Fill the water tank.
Step 4 Screw back the water tank cover.
Step 5 Hold the water tank handle. Make sure the water tank cover points downwards.
Check the water quantity and ensure that there is no water leaking from the po‐
sition of the water tank cover.
Step 6 Place the water tank vertically on the base unit.
Do not use water containing additives (starch, spices, aromatic substances, softeners,
etc.).
Power on
Before using the product, always check if the appliance is not damaged.
Step 1 Plug the appliance.
Step 2 Press the power button.
Step 3 Press the adjustment button.
Step 4 After approximately 45-70 seconds, the steam nozzle will start to generate
steam.
Ironing the clothes
Never iron the clothes you are wearing.
Do not touch the high-temperature steam and the steam nozzle panel during ironing.
Pay attention to prevent the danger of steam splashing when using the appliance.
Avoid the steam nozzle aiming at people or animal.
Step 1 Hang the clothes on the hanger.
Step 2 Hold the steam nozzle and keep it vertical.
Step 3 Attach the steam nozzle to the clothes and iron down.
During use, part of the steam will condense in the hose, causing a "gurgling sound",
which is normal. If this happens, straighten the steam nozzle and hose upward to make
the condensate flow back into the water tank.
ENGLISH 5