Canon FINISHER - D1 Service Manual page 120

CHAPTER 3 MECHANICAL SYSTEM
5) Remove the three screws [6], and detach
the prism support plate [5].
6) Remove the E-ring [7] from the front end
of the buffer roller shaft, and detach the
bearing [8].
3-32
COPYRIGHT © 1999 CANON INC.
[6]
CANON FINISHER - D1 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
[5]
Figure 3-603
[6]
Figure 3-604
[7]
Figure 3-605
[8]