Call Screening - Philips CD680 User Manual

Listen to the incoming messages
You can listen to the incoming messages in the
sequence they are recorded.
From the base
• To start/stop listening, press
• To adjust the volume, press
• To play the previous message/Replay the
current message, press .
• To play the next message, press .
• To delete the current message, press .
Note
•
No deleted messages can be recovered.
From the handset
Select [Menu] > > [Play], then press [OK]
to confirm.
» New messages start playing. Old
messages start playing if there is no
new message.
Press [Back] to stop listening.
•
Press [Option] to enter the options
•
menu.
• Press / to increase/decrease the
volume.
Delete an incoming message
From the base
Press when you listen to the message.
» The current message is deleted.
From the handset
1
When you listen to the message, press
[Option] to enter the options menu.
2
Select [Delete], then press [OK] to
confirm.
» The current message is deleted.
Delete all old incoming messages
From the base
Press and hold
.
/ .
From the handset
1
2
•
You can delete the read messages only. No
deleted messages can be recovered.

Call screening

You can hear the caller while he is leaving a
message. Press
From the base
Press
during call screening. The lowest volume level
turns off the call screening.
Set the sound quality of the message
You can adjust the sound quality of the
messages received from the answering machine.
1
2
•
The sound quality can only be adjusted before
recording starts.
in standby mode.
» All old messages are permanently
deleted.
Select [Menu] > > [Delete all], then
press [OK] to confirm.
» The handset displays a confirmation
request.
Press [OK] to confirm.
» All old messages are permanently
deleted.
Note
to pick up the call.
/ to adjust the speaker volume
Select [Menu] > > [Msg quality], then
press [OK] to confirm.
Select the new setting, then press [OK]
to confirm.
» The setting is saved.
Note
EN
39