Panasonic WJ-SX 150A Operating Instructions Manual page 32

Notes:
• Before connecting a terminal-mode system controller to the DATA 4 port, configure the system through SETUP MENU or
WJ-SX150A Administrator Console.
• If an optional network board is installed inside the recorder and you are to control it from LAN (local area network) or the
Internet, refer to a service manual procurable in your area.
Connection with Digital Disk Recorder WJ-HD100 Series or Time-lapse VCR
• With the Multiplexer board, the recorded images of Camera 1 to 16 can be multiplexed to Digital Disk Recorder, WJ-
HD100 Series or a time-lapse VCR.
To use WJ-HD100 Series or a time-lapse VCR as a recorder, you need to install a Multiplexer board inside the matrix
switcher.
34
Camera
3
Camera Camera
1 2
Matrix Switcher
Recorder or Time-lapse VCR
Max. 4 System Controllers
Camera
16
Max. 16
Camera Inputs
4 Monitor Outputs
Available for surveillance or playback of the camera images
MUX
16 Alarm Inputs
Multiplexer Board
WJ-SXB151