Page 1
Audio Video Center This Audio Video Center is intended to be use with Hitachi Ultra Thin monitors that includes remote controls. This AVC01U does not include a remote control. - Audio Video Center with ATSC/NTSC/QAM tuning. - Selectable Upscaling to 1080i/1080p High Definition Output (HDMI).
Hitachi Audio Video Center. Please fill out your warranty card and mail it to Hitachi. This will enable Hitachi to notify you promptly in the improbable event that a safety problem should be discovered in your product model. Model and serial numbers are indicated underneath the product.
Page 4
Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Hitachi Home Electronics (America), Inc. may void the user’s authority to operate the equipment. Cables Connections to this device must be made with shielded cables with metallic RFI/EMI connector hoods to maintain compliance with FCC Rules and Regulations.
Before operating the set, please fully understand the prerequisites such as specifications or constraints for the hardware and software. Hitachi is not responsible and accept no liability for any loss, damage or injury as a result of misuse. Reproduction, copying, utilization, modification and/or transmission in whole or in part of this manual are prohibited except by prior written consent.
■ Do not allow liquids or any foreign matter (such as metals or flammable items) to enter the unit. If this does occur, turn off the main power, unplug the power cord, and contact 800-HITACHI immediately. Exercise special caution when young children are around the unit.
Page 7
If water or any liquid spills onto the unit, it may cause short-circuiting and result in fire or electric shock. If this occurs, turn off the main power, unplug the power cord, and contact 800-HITACHI immediately. Do not rest anything heavy on top of the unit.
Page 8
SAFETY PRECAUTIONS (continued) ■ Do not place or use the unit in a dusty location. This could cause a malfunction. ■ Do not cover or block any ventilation holes on the product. The unit would overheat and this could cause fire or damage to the product which may shorten its service lifetime. Install the product in accordance with the instructions in this manual.
SAFETY PRECAUTIONS (continued) ■ Do not install the unit in locations where it will be subjected to high temperature. This could damage the cabinet or components of the product. Do not install near any heat sources such as radiators, heating grilles, stoves, or other apparatus that produce heat. Keep the unit out of direct sunlight.
Attach the cushion around the HDMI cable so as not to leave any clearance. NOTE The A/V Center is intended to be used with Hitachi LCD UT Monitors that include remote controls. The A/V Center does not include a remote control.
Do not use a power supply voltage other than that indicated (AC120, 60Hz). It may cause fire or electric shock. 2) Hitachi A/V Center is provided with a Power Off/On button on Front Panel and you can Turn it ON by pushing this button, however Hitachi A/V Center is intended to be used with Hitachi UT Monitors ;A/V Center and Monitor are connected...
Y-PBPR inputs . r USB Port(For S/W Upgrade only) This slot is for future software upgrades. Hitachi will notify you if a software upgrade is required for your A/V Center. In order to receive written notification, please complete and return your warranty card.
Remote Control(Included with UT LCD Monitors) In addition to controlling all of the functions on your Hitachi UT LCD Monitor and A/V Center, the new remote control is designed to operate different types of devices, such as, DVD players, Cable Boxes, Set-Top-Boxes, Satellite Receivers, VCR's, PVR's and AVR's.
PREPARATION Remote Control Battery Installation The remote control operates on 2 “AAA” batteries. 1. Open the battery compartment cover Push and pull open the battery compartment cover on the backside in the direction of the arrow, and remove the cover. 2.
CONNECTION The unit is suitable for various kinds of connections. Make a connection in the following steps. Be sure to turn off the main power first when connecting external equipment. NOTE Do not connect the power plug to the wall socket until all other connections are completed. 1.
CONNECTION (continued) 1. Connect your Equipment to the A/V Center (continued) Connecting to Equipment Having a Audio Digital Input Terminal The A/V Center “OPTICAL OUT” Audio terminal can be connected to devices equipped with Optical Input capabilities such as Audio Amplifiers Systems. The “OPTICAL OUT” from the A/V Center Rear Panel is a fixed output.
BASIC OPERATION Power On/Off Turn On the power of the unit. To turn On the power to the unit: 1. Press the Power Switch on the A/V Center front or press the Power (On/Off) button on the remote control. The Indicating Lamp turns Blue. The image will display on UT Monitor screen.
BASIC OPERATION (continued) Volume Up/Down 1. To increase the sound volume, press the Volume Up button on the remote control or control panel. The Volume Indicator value on the screen will shift to the right. 2. To decrease the sound volume, press the Volume Down button on the remote control or control panel.
BASIC OPERATION (continued) Input Switching Press the button to access the INPUTS menu. Use the CURSOR and OK buttons to scroll and select the inputs that are being used. Pressing the INPUT button repeatedly will also cycle through the Inputs menu items.
If done correctly, the device LED indicator will blink 3 times to confirm proper setup. The remote will now control the desired device. SETUP EXAMPLE (Hitachi Cable Box with precode 0003) Turn ON your Cable box. Select Cable mode by using your SAT/CBL button to position the LED indicator on SAT/CBL.
Page 21
SETUP OPERATION (continued) How to Use the Remote to Control your External Devices MY CABLE BOX CODE IS:____________________ NOTE Refer to the operating guide of the Cable Box for operation of the buttons exclusively for the Cable Box. PRECODED CABLE BOX buttons These buttons transmit the chosen precoded cable codes : -Power -Cursor &...
Page 22
SETUP OPERATION (continued) How to Use the Remote to Control your External Devices MY DVD PLAYER CODE IS:___________________ NOTE Refer to the operating guide of the DVD Player for operation of the buttons exclusively for the DVD Player. PRECODED DVD buttons These buttons transmit the chosen precoded DVD codes : -Power -Cursor &...
Page 23
SETUP OPERATION (continued) How to Use the Remote to Control your External Devices MY AUDIO/VIDEO RECEIVER (AVR) CODE IS:____________________ AVR Device Button NOTE Refer to the operating guide of the AVR for operation of the buttons exclusively for the AVR. PRECODED AVR buttons These buttons transmit the chosen precoded cable codes : -Power...
SETUP OPERATION How to Use the On-Screen Display (OSD) System You can use the On-Screen Display system to access the various kinds of the features and functions of your A/V Center. Basic Operation 1. Press the button on the remote control or the Menu button on the control panel underneath the UT monitor.
On-Screen Display This part of the screen shows which selections are available. Audio/Video Channel Manager Locks Timers Setup Main Menu List Video Resolution Auto Movie Mode 3D Comb Filter Audio Source Audio/Video Audio Language Digital Output Lyp Sync NOTE “3D Comb Filter” is only available to Composite Inputs and Analog Channels. “Audio Language”, “Digital Output”...
On-Screen Display (continued) Audio/Video You can adjust some settings of the display and audio condition. Select "Audio/Video" from Menu list. Audio/Video Channel Manager Locks Timers Setup Move Selected Items Video Resolution Auto Movie Mode 3D Comb Filter Audio Source Audio Language Dolby®Digital Digital Output Lyp Sync...
Please review this Operating Guide for further information regarding such connections. Hitachi supports the DTV transition and as a member of the DTV Transition Coalition urges consumers to visit these web sites for interactive guides and further detailed information: •...
On-Screen Display (continued) Locks This function will block out the picture and sound of the selected channel Select "Locks" from the Menu list. Audio/Video Channel Manager Locks Timers Setup Move Select button to select the RATING CATEGORY (MOVIE, TV, etc.) that you want to block. ◄►...
Page 31
On-Screen Display (continued) Locks(continued) Motion Picture Ratings Table NOT RATED Contains no rating. Not Rated (NR) and Not Applicable (NA) programs. Movie has not been rated or ratings do not apply. General audiences. All ages admitted. Parental guidance suggested. Some material may not be suitable for children. PG-13 Parents strongly cautioned.
Page 32
On-Screen Display (continued) Locks (continued) Canadian Ratings French Chart General - Programming intended for audiences of all ages. Contains no violence, or the violence content is minimal or is depicted appropriately with humor or caricature or in an unrealistic manner. 8 ans+ 8 + General - Not recommended for young children - Programming intended for a broad audience but contains light or occasional violence that could disturb young children.
On-Screen Display (continued) Timers Select TIMERS to set your Clock and the Sleep Timer Select “Timers” from the Menu list. Audio/Video Channel Manager Locks Timers Setup Move Select Selected Items Use the If you observe daylight savings, use the Set The Clock* SAVING CORRECTION checkbox and the Use the AM or PM, MONTH, DAY, and YEAR.
On-Screen Display (continued) Setup Select SETUP when setting your TV up for the first time. Select “Setup” from the Menu list. Audio/Video Channel Manager Locks Timers Setup Move Select Selected Items Set The OSD & Panel Options Set The Inputs Set The Closed Captions NOTE Some types of digital closed captions will not work with this A/V Center.
Page 35
NOTE Any power interruption during the upgrade process will cancel the upgrade. When this happens, repeat the upgrade procedure. For further information about A/V Center software upgrade procedure, please contact 800-HITACHI or visits us on the web: www.hitachi.us/tv Setup hint This feature shows software information and easy upgrade procedure.
Before calling a service technician, check the following tables first. If the problem cannot be solved with the suggested procedures, contact 800-HITACHI. For your safety, NEVER try to repair the product yourself. When the Following Messages Appear on the Screen...
Page 37
TROUBLESHOOTING (continued) Symptom and Checklist (continued) Symptoms Normal picture, but no sound No picture - normal sound The remote control does not work. Picture Frezze and/or the buttons on both the remote control and control panel do not work. Normal picture but no color-normal sound No picture UT Monitor Indicating lamp →...
PRODUCT SPECIFICATIONS SPECIFICATION A/V Center dimensions Net weight Temperature Ambient conditions Relative humidity Power supply Power consumption/ at standby FCC Class 1 Integrated Tuner 2 Composite Video and L/R Audio 2 Component Video and L/R Audio USB 1.1 1 HDMI V.1.3a Digital Audio Power On/Of switch Front Key...
The MODEL NAME and SERIAL NUMBER of this product is located underneath the set. Please follow the next steps to find this information and then record it in the space provided below for use in case you call 800.HITACHI, they will require this information in order to give you the proper support.
N. Any Product returned for service that is damaged due to improper packaging, mishandling or shipping. (IMPORTANT: When shipping any Product to a Hitachi Authorized Service Centers, Product owner must package it securely in the original shipping container or its equivalent to prevent damage. The Product must be returned with the shipping charges prepaid and proof of purchases included in the shipping container.
IMPORTANT – READ CAREFULLY: This End User License Agreement for HITACHI Software (this “Agreement”) is a legal agreement between you (“you” or “your”), in your capacity as the owner of a HITACHI brand display product (the “Product”), and HITACHI Home Electronics (America), Inc. (“HITACHI”). By using the Product or the HITACHI software installed on the Product (the “HITACHI...