Specifying Data; Deleting The Data Settings - Hitachi SH-P300 Online User's Manual

Specifying Data

You can specify which functions can use the data being played back. (See
"Data That Can be Managed in Data Folders" on page 105.)
Specifying the functions that can use data:
Press
Apply
1.
played back.
Highlight the function you want to assign to the data and press
2.
Depending on the selected function, one of the following operations is
performed:
Wallpaper:
pixels high, move the cursor key to select the section of the image that
will be displayed. Then press
Phone Book
and 64 pixels high, move the cursor key to select the section of the
image that will be displayed. Then press
Phone Book
"Finding Internal Phone Book Entries" on page 82) and press
Alarm:

Deleting the Data Settings

To delete the data settings:
Press
Apply
1.
Select the function to be deleted and press
2.
For Phone Book entries or Alarms, select the entry you want to be
3.
delete and press
Tip:
When you cancel the settings for a function, the function settings
revert to their default values.
Section 2: Understanding Your Phone
108 2H: Personal Organizer
(the center of the cursor key) while the data is being
If the image data is more than 120 pixels wide and 130
(Images) If the image data is more than 120 pixels wide
:
(Ringer & Audio)
Highlight the entry you want to set and press
while the data to be deleted is being played back.
.
OK
.
Apply
Apply
Find the entry you want to set (See
:
Remove
OK
.
OK
.
OK
.
.
.