Table of Contents
Advertisement
Important Information
Do not drop the body or power base to avoid damaging it.
●
Do not move the body or power base by dragging.
●
(It may scratch the table or work surface.)
Do not turn the power switch on when no water inside the body.
●
(It may cause malfunction.)
Do not use the appliance at outdoors.
●
Make sure the appliance is properly located on the stand before
●
switching on.
Beware of steam when the appliance is refill with water
●
immediately after boiled.
Do not move the appliance by holding the lid.
●
Make sure to clean the appliance after every use.
●
This symbol on the products indicates "hot surface and should
not be touched without caution".
EN8
Parts Names and Operation Instructions
Open lid button
Lock lever
Indicating sealing
Lid
status
Indicating
pourable status
Spout
Vessel
Body
Body connector
Power base connector
Power base (Stand)
Body connector
Before use
Clean the appliance by following the steps below for the first time or when you have
●
not used it for a while.
① Fill water up to the maximum water level and boil. (P. EN10)
② Pour the water out from the spout. (P. EN11 After use, pour out any remaining water.)
Do not use power strip or extension cord.
●
Vent
Lid Seal Packing
Power switch
On
Handle
Power cord
Power plug
EN9
Advertisement
Table of Contents
