Displaying The Shooting Locations Recorded On A "Memory Stick - Sony HKDW-704 Operation Manual

1
Output format
You have to confirm and select the output format for data from the
REMOTE connector using the GPS SETUP menu, according to the map
to be used.
when a Navin'You map is used: NVYOU
When a map other than a Navin'You map is used: NMEA
Note
If you change the setting, turn the power of the camcorder off once, then
turn it on again. The camcorder outputs data in the selected output
format.
Even if you change the setting on the GPS SETUP menu, this setting will
not be activated unless you turn the power off and on again.
For detailed information, see "Output from the REMOTE connector" on page 1-
26.
Displaying shooting locations on a map
1
Start your mapping software and set the GPS function to on.
For details, refer to the operation manual supplied with the mapping software.
2
Start playback by pressing the PLAY button on the camcorder.
The shooting locations are displayed linked with the video images
on the monitor.
Note
Set the map matching function to on or off according to the shooting
conditions.
1-5-2 Displaying the Shooting Locations
Recorded on a "Memory Stick"
You can display shooting locations recorded on a "Memory Stick" on a
map.
For details, refer to the operation manual supplied with Navin'You.
Note
To display the shooting locations recorded on a "Memory Stick", version
5.0 or later of Navin'You is required.
1-20
Chapter 1 Using GPS Data