Samsung Smart MBS RRH-P4 Installation Manual page 86

2600-00CTEIGAA Ver.
CHAPTER 2. Installation of RRH-P4
Installing the Circuit Breaker
To ensure stability in power supply, a circuit breaker must be installed on the
power cable connected to the rectifier (or power distributor).
Capacity of -48 VDC circuit breaker is 32 A.
Pressure terminal
As for the pressure terminal or the cable, the UL Listed products or equivalent
should be used.
Ex) RRH-P4 AWG10 (4 mm
2-56
4.0
- Manufacturer: Donga bestech, Part No: PTSR0306
2
)Type
© SAMSUNG Electronics Co., Ltd.