Diagnostic Mode - Sony HDW-700A Maintenance Manual

The DIAGNOSTIC mode is used for checking the VTR.
n
Use this mode with the tape stopped.
Switches
1. DIAGNOSTIC switch
1. DIAGNOSTIC switch
Press to enter and exit the DIAGNOSTIC mode.
2. ADVANCE button
Shifts the left digit of menu one step.
3. SHIFT button
Shifts the right digit of menu one step.
OPERATION
1. Press the DIAGNOSTIC switch on the side panel with a stick tip, etc. to enter the DIAGNOSTIC
mode.
2. To shift the menu, press the ADVANCE or SHIFT button.
ADVANCE button : Shifts the left digit one step at a time.
SHIFT button : Shifts the right digit one step at a time.
3. To exit the DIAGNOSTIC mode, press the DIAGNOSTIC switch again.
HDW-700AE MMP1
http://getMANUAL.com
Section 6

Diagnostic Mode

3. SHIFT button
2. ADVANCE button
ADVANCE SHIFT
0
PRESET
F-RUN
SET
R-RUN
REGEN
DIAG
REAL
TIME
DF ON
OFF
NDF SET
Time code/audio control panel
CH-1 CH-2
LEVEL
10 0 10
AUTO
MANUAL
AUDIO SELECT
AUDIO IN
FRONT
REAR
CUE IN
MIX
CH-1 CH-2
6-1