NEC BladeServer Express5800 Series User Manual page 30

CPU Blade Access Side
1 POWER lamp
The lamp lights green when the CPU blade is powered on.
The lamp lights amber when the CPU blade is powered off but power is supplied from the
power supply unit.
2 POWER switch
The switch turns on or off the power of the CPU blade itself. Pressing the switch for 4
seconds or longer causes the power supply to be turned off forcibly.
3 STATUS lamp (green/amber/red)
The lamp indicates the status of the CPU blade. See "Lamp Indications" described later for
the indications of the lamp.
4 DUMP switch
Press this switch to run the memory dump.
5 LAN1 Link/Access lamp (green)
The lamp is on when LAN port 1 is connected to the network. The lamp blinks when data is
being transmitted.
6 RESET switch
Press this switch to reset the CPU blade.
7 LAN2 Link/Access lamp (green)
The lamp is on when LAN port 2 is connected to the network. The lamp blinks when data is
being transmitted.
1
2
3
4
5
1
6
2
7
ID
8
9
10
11
General Description 2-5