Motorola KEY 3000 User Manual page 267

KVL 3000 User's Guide
Operational
Error Message
Probable Cause(s):
TARGET'S
SYSKEY DOES
NOT MATCH!
Remedy(s):
Probable Cause(s):
TARGET
UPDATE
Remedy(s):
FAILURE!
Probable Cause(s):
TEK NEEDED
FOR KMF
DOWNLOAD!
Remedy(s):
Probable Cause(s):
TIMED OUT!
Remedy(s):
NO RESPONSE
FROM KMF!
Probable Cause(s):
UKEK NEEDED
FOR KMF
DOWNLOAD!
Remedy(s):
9-8
Probable Cause and Remedy
1) When sharing and performing a
Load Key or Load Group operation
with a DVI XL key, the System Key in
the source KVL must match the Sys
tem Key in the target KVL.
1) Ensure that the System Keys in
both KVLs match.
1) One or more Store and Forward
commands were not performed cor
rectly.
1) Connect the KVL to the KMF to
upload the unit responses and
download any new Store and For
ward messages.
1) In order to perform a download,
the KVL must contain a UKEK as as
signed in the KMF. In this case, a
TEK has not been assigned or it
does not match the TEK in the KMF.
1) Coordinate with the KMF opera
tor to ensure that TEKs are assigned
and match.
1) Baud rates do not match be
tween KVL and KMF.
2) KMF is not set up correctly for
Store and Forward operation.
1) Make sure that baud rate in KVL
(via CONFIG menu) matches the
baud rate in the KMF.
2) Request that KMF operator
verify that KMF is set up correctly for
Store and Forward operation.
1) In order to perform a download,
the KVL must contain a UKEK as as
signed in the KMF. In this case, a
UKEK has not been assigned or it
does not match the UKEK for this
KVL 3000 in the KMF.
1) Coordinate with the KMF opera
tor to ensure that UKEKs are as
signed and match.
ASTRO 25 Operation