Canon VB-C500D Start Manual page 63

Canon security camera user manual

Hide thumbs Also See for VB-C500D:

Table of Contents

Observe the following items when connecting the interface cables.

• Firmly insert the dedicated terminals on the audio interface cable into the

audio input/output terminals on the camera.

•

Affix the interface cables in the specified grooves, respectively, in the order of

power supply, audio and I/O,

as shown below.

At this time, make sure the heat-shrinkable tubes that protect the cables rest

properly in front of the affixing grooves.

Heat-shrinkable tube

for cable protection

Affixing groove for cable

Power

If the cable is not properly installed, it may come off and cause the camera to

malfunction.

• When disconnecting/connecting the audio interface cable,

I/O interface cable and power interface cable, always do so by holding the

connector.

• If the audio input/output, external device input/output and external power

supply are used, do not use any cable other than the dedicated interface

cables. Damage may occur.

Note

Affixing groove for cable

Audio

Interface cable fixing method

Note

Step 4 Install the Camera

Affixing groove for cable

I/O

2-21

Table of Contents