Hybrid Transmission - Suzuki ACROSS 2020 Series Owner's Manual

to ACC. Perform the following pro-
cedure to turn the switch to OFF:
1
Check that the parking brake is
set.
2
Shift the shift lever to P.
3
Check that "IGNITION ON" is
displayed on the multi-informa-
tion display and press the power
switch shortly and firmly.
4
Check that "ACCESSORY" or
"IGNITION ON" on the multi-
information display is off.
NOTICE
To prevent 12-volt battery dis-
■
charge
Do not stop the hybrid system when
the shift lever is in a position other
than P. If the hybrid system is stopped
in another shift lever position, the
power switch will not be turned to
OFF but instead remain ON. If the
vehicle is left in ON, 12-volt battery
discharge may occur.
5-2. Driving procedures

Hybrid transmission

Select the shift position
depending on your purpose
and situation.
Shift position purpose and
functions
Shift
Objective or function
position
Parking the vehicle/start-
P
ing the hybrid system
R Reversing
N Neutral
D
Normal driving
S
S mode driving
*1
: To improve fuel efficiency and
reduce noise, shift the shift lever to D
for normal driving.
*2
: Selecting shift ranges in the D posi-
tion allows suitable use of engine
braking. (P.285)
*3
: By selecting shift ranges using S
mode, you can control accelerating
force and engine braking force.
When driving with dynamic radar
■
cruise control with full-speed range
Even when performing the following
actions with the intent of enabling
engine braking, engine braking will not
activate because dynamic radar cruise
control with full-speed range will not be
canceled.
While driving in D or S mode, down-
●
shifting to 5 or 4. (P.285, 286)
● When switching the driving mode to
sport mode while driving in D position.
(P.388)
283
*1, 2
5
*3