24
en | Connection
1.
2.
Wiring
For connection to the standard bases MS400/MS400B note the following:
Notice!
i
When using unshielded cables for the connection of the remote indicator, the maximum cable
length is 3m. No limitation when using shielded cables.
FAA‑420‑RI‑ROW
1.
2.
3.
2021-11 | 4 | F.01U.283.550
Place the cap on the base plate in such a way that the two hooks are inserted into the
slits.
Press the cap lightly onto the base plate until the snap‑fit‑hook engages.
Wire the remote indicator as shown.
Place the cap on the base plate in such a way that the two hooks are inserted into the
slits.
Press the cap lightly onto the base plate until the snap‑fit‑hook engages.
User manual
AVENAR detector 4000
Bosch Sicherheitssysteme GmbH