Connecting To The Network - Sony BKM-15R Operation Manual

Monitor control unit
Table of Contents

Advertisement

Available languages

Available languages

Connecting the AC power cord
Connect the supplied AC power cord to the AC IN socket.
The AC IN connector takes precedence over the DC 5V IN
connector.
When the AC power is used, the connection to the DC 5V
IN connector is not necessary.

Connecting to the Network

NETWORK
LAN
PEER TO PEER
Set to LAN
Monitor
DC 5V OUT
connector
LAN (10/100)
connector
When the AC power
cord is connected to
the BKM-15R, do not
connect this cable.
DC 5V IN connector
BKM-15R
AC IN socket
NETWORK
LAN
Set to LAN.
Notes
• Turn off the MAIN POWER switch of the monitor
before connecting the units.
• Set the NETWORK switch of this unit and the monitors
to LAN.
• Connect to the network by using a 10BASE-T/
100BASE-TX cable (shield type, optional).
Monitor
LAN (10/100) connector
Switching hub (with AUTO
MDI/MDI-X function)
LAN (10/100)
connector
PEER TO PEER
• When an optional LAN cable is connected, use a shield
type cable to prevent miss-operation due to noises.
• Up to 32 monitors and the BKM-15R (max. 4) can be
connected.
• The monitor is controlled by the BKM-15R within the
same subnetwork.
• Use an optional switching hub with auto select function
(AUTO MDI/MDI-X) of a straight/cross cable.
• Connect the DC 5V IN connector of this unit and the DC
5V OUT connector of the monitor by using the SMF-
700.
• The power is supplied from the monitor via the DC 5V
cable. The connection to the AC IN socket is not
necessary.
See "Connections" in the Operation Manual of the used
video monitor.
Connecting the AC power cord
Connect the supplied AC power cord to the AC IN socket.
The AC IN connector takes precedence over the DC 5V IN
connector.
When the AC power is used, the connection to the DC 5V
IN connector is not necessary.
• For the remote control operation, see "Selecting the
Monitor/Group" in the Operation Manual of the used
video monitor.
• For the network setting of the BKM-15R, see "[H]
Setting the Controller – CONTROLLER Menu" in the
Operation Manual of the used video monitor.
13
Connections

Advertisement

Table of Contents
loading

Table of Contents