Canon HR10 Instruction Manual page 3

In these safety instructions the word
'*product" refers to the Canon HD Camcorder
HR10 A and all its accessories.
1
Read Instructions -- All the safety and
operating instructions should be read
before the product is operated.
2 Retain Instructions -- The safety and
operating instructions should be retained
for future reference.
3 Heed Warnings -- All warnings on the
product and in the operating instructions
should be adhered to.
4, Follow Instructions -- All operating and
maintenance instructions should be
followed.
5 Cleaning -- Unplug this product from the
wall outlet before cleaning. Do not use
liquid or aerosol cleaners. The product
should be cleaned only as
recommended in this manual.
6 Accessories -- Do not use accessories
not recommended in this manual as they
may be hazardous.
7 Avoid magnetic or electric fields -- Do
not use the camera close to TV
transmitters, portable communication
devices or other sources of electric or
magnetic radiation. They may cause
picture interference, or permanently
damage the camera.
8 Water and Moisture -- Hazard of electric
shock -- Do not use this product near
water or in rainy/moist situations.
9 Placing or Moving -- Do not place on an
unstable cart, stand, tripod, bracket or
table. The product may fall, causing
serious injury to a child or adult, and
serious damage to the product.
A product and cart
combination should be
moved with care. Quick
stops, excessive force,
and uneven surfaces
may cause the product
and cart combination to
overturn.
10
11
12
13
Power Sources -- The CA-570 Compact
Power Adapter should be operated only
from the type of power source indicated
on the marking label. If you are not sure
of the type of power supply to your
home, consult your product dealer or
local power company. Regarding other
power sources such as battery power,
refer to instructions in this manual.
Polarization -- The CA-570 Compact
Power Adapter is equipped with a
polarized 2-prong plug (a plug having
one blade wider than the other).
The 2-prong polarized plug will fit into
the power outlet only one way. This is a
safety feature. If you are unable to insert
the plug fully into the outlet, try reversing
the plug. If the plug still fails to fit,
contact your electrician to replace your
obsolete outlet. Do not defeat the safety
purpose of the polarized plug.
Power Cord Protection -- Power cords
should be routed so that they are not
likely to be walked on or pinched by
items placed upon or against them. Pay
particular attention to plugs and the
point from which the cords exit the
product.
Outdoor Antenna Grounding -- If an
outside antenna is connected to the
product, be sure the antenna is
grounded so as to provide some
protection against voltage surges and
built-up static charges. Section 810 of
the National Electrical Code, ANSI /
NFPA No. 70--1984, provides
information with respect to proper
grounding of the mast and supporting
structure, grounding of the lead-in wire
to an antenna discharge unit, size of
grounding conductors, location of
antenna discharge unit, connection to
grounding electrodes, and requirements
for the grounding electrode. See figure 1.