Page 1
LGEAP_MCD112_ENG_MFL40387019 MODEL : MCD112 MCD112B MCD212 As an E ® Partner, LG NERGY has determined that this product or product models meet the ® guidelines for NERGY energy efficiency. ® is a U.S. registered mark. NERGY ENGLISH...
There is so much your Hi-Fi system can do Record from a CD, AUX, USB or radio to cassette Go to page 8 Contents Setting up About Player About Remote control Listening to CDs Connecting your portable USB player - OPTIONAL Listening to the radio Listen to cassette tapes Recording...
Setting up 1 Connect the speaker cables to the player Cables from the left-hand speaker connect to the terminal marked L (left) + (plus) and - (minus). Cables from the right-hand speaker are connected to the terminal marked R (right) + (plus) and - (minus). To connect the cable to the player, press each of the four square plastic finger pads on the rear of the player.
About Player POWER You can set up the unit into an economic power save mode. In the power-on status, press and hold 1/] (POWER) for about 3 seconds. To cancel power save mode, press 1/] (POWER). ST./MONO Press ST./MONO. This will change the tuner from stereo to mono and usually improve the reception.
About the Remote control Search for a folder of MP3/WMA files When a CD containing MP3/WMA files in several folders is being played, press PRESET/FOLDER to select the folder you want to play. Fall asleep while listening to your player Firstly, select a radio station or music.
Listening to CDs ON PLAYER 1. Open the CD drawer: Z OP./CL. 2. Select the CD tray : D.SKIP 3. Insert the CD : Label facing up. 4. Close the CD drawer: Z OP./CL. The display will show the total number of tracks (files).
Listening to the radio Make sure both the FM and AM aerials are connected. ON PLAYER 1. Select either AM or FM: TUNER 2. Select the radio station: TUNING (-) or TUNING (+) 3. To ‘save’ a radio station: A preset number will show in the display.
Recording Record from a CD, AUX, USB or radio to cassette Wind the tape to the point where you want the recording to start. Use only normal tapes. ON PLAYER 1. Open the TAPE 2 door : Z PUSH EJECT 2.
Use your player as an alarm clock Press and hold TIMER for two seconds. Each function, TUNER, CD, USB, TAPE flashes for two seconds. Press SET when the function you want to be woken by is showing. If you choose TUNER, ‘PLAY’ and ‘REC’ flash, PLAY and REC.
LG Authorised Service Centre. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon.