Original installation and operation manual
Illustration
11
12
10
Normally Open (NO)
Common (CO)
Normally Closed (NC)
±24V
+24 VDC (0 V)
±24V
0 V (+24 VDC)
3
4
5
6
I
2
3
Description / explanation
6. Connect the voltage supply cable to the power control
board in accordance with the terminal diagram.
7. Insert the power control board [11] back into the top
cover [3] and fasten using the pan-head screw [12].
Tighten the voltage supply cable [I] while doing this
and screw the components of the cable gland [4, 5, 6]
in place.
8. Fit the cable terminal [10], set the top cover [3] in
place and fasten using the pan-head screw [2].
BEKOMAT
16 CO
®
29 | 60