Attaching And Removing An Adjustable Height Stand; Attaching An Adjustable Height Stand - HP ProOne 400 Maintenance And Service Manual
Hide thumbs
Also See for ProOne 400:
- Hardware reference manual (40 pages) ,
- Hardware reference manual (49 pages)
Table of Contents
Advertisement
7.
Lift the stand up (2), and then pull the stand hooks out of the computer (3).
Attaching and removing an adjustable height stand
Attaching an adjustable height stand
To install the stand:
1.
Place the computer face down on a soft flat surface. HP recommends that you set down a blanket, towel,
or other soft cloth to protect the bezel and screen surface from scratches or other damage.
2.
Engage the hooks in the top of the stand in the two large holes in the upper part of the back of the
computer (1).
3.
Rotate the stand down until it clicks into place (2).
Attaching and removing a stand
21
Advertisement
Table of Contents
