Setting; Management - Acer K138STi Series User Manual

22

Setting

Network LAN Reset
To refresh LAN IP.
LAN IP/Mask
Identify IP and Mask address. (LAN Mode)
WiFi IP/Mask
Identify IP and Mask address. (WiFi Mode)
<Note> "WiFi IP/Mask" will grey out if Acer WirelessProjection-Kit
isn't being installed.
Reset
Press the
on all menus to the factory default settings.
Note 1: Functions vary depending on model definition.
Note 2: Acer WirelessProjection-Kit is only allowed to be installed while
projector is off; forbidden to plug out or installed while projector is active.

Management

ECO Mode Choose "On" to dim the projector LED brightness which will lower
power consumption, extend the LED life and reduce noise. Choose
"Off" to return normal mode.
High Altitude Choose "On" to turn on High Altitude mode. Operate the fans at
full speed continuously to allow for proper high altitude cooling of
the projector.
Auto Shutdown The projector will automatically shutdown when there is no signal
input after the allocated time. (default is 15 minutes)
AC Power On Choose "On" to power on projector while AC power plug in.
button and choose "Yes" to return the parameters