Audio" Menu; Display" Menu; Others" Menu - Panasonic SC-VK480 Operating Instructions Manual

"VIDEO" menu
(continued)
STILL MODE
Specify the type of picture shown when
paused.
VIDEO OUT (I/P)
Select "PROGRESSIVE" only if
connecting to a progressive output
compatible television.

"AUDIO" menu

SETTING STATE
PCM OUTPUT
Check the digital input limitations of the
equipment you connect using COAXIAL
terminal and select the maximum
sampling frequency of PCM digital output.
DOLBY DIGITAL
With COAXIAL connection ( page 10)
DTS
With COAXIAL connection ( page 10)
DYNAMIC RANGE

"DISPLAY" menu

SETTING STATE
LANGUAGE
Choose the language for the on-screen
messages.

"OTHERS" menu

SETTING STATE
REGISTRATION
DivX
Displays the unit's registration code.
JPEG TIME
EASY SETUP
DVD-VR/DATA
Select to play only DVD-VR or DATA
format.
SCREEN DIMMER
This is to prevent burn mark on the
television screen.
DEFAULTS
This returns all values in the Setup menus
to the default settings.
Refer to "Frame still and field still" ( page 38, Glossary).
4
AUTO
FIELD : The picture is not blurred, but picture quality is lower.
4
FRAME : Overall quality is high, but the picture may appear blurred.
4
INTERLACE PROGRESSIVE
When you select "PROGRESSIVE", a message screen will appear.
For progressive output, press [e] and then press [OK].
Press [ , RETURN] to cancel.
Display the current setting of the items below
UP TO 48kHz: When connected to equipment compatible with 44.1 or 48 kHz
UP TO 96kHz: When connected to equipment compatible with 88.2 or 96 kHz
• Signals from copy-protected discs are converted to 48 or 44.1 kHz.
• Some equipment cannot handle sampling frequencies of 88.2 kHz, even if they can
handle 96 kHz. Read your equipment's operating instructions for details.
BITSTREAM
Select "BITSTREAM" when the equipment can decode the bitstream
PCM
(digital form of multi-channel data). Otherwise, select "PCM". (If the
bitstream is output to the equipment without a decoder, high levels of
BITSTREAM
noise can be output and may damage your speakers and hearing.)
PCM
ON: Adjusts for clarity even when the volume is low through compressing the range
of the lowest sound level and the highest sound level. Convenient for late night
viewing. (Only works with Dolby Digital.)
OFF
Display the current setting of the items below
ENGLISH
繁體中文
Display the current setting of the items below
SHOW CODE: You need this registration code to purchase and play DivX Video-on-
Demand (VOD) content ( page 7, ABOUT DIVX VIDEO-ON-DEMAND).
To change the slideshow timing
1 SEC to 15 SEC
(in 1 unit)
• "3 SEC" is the factory preset.
SET: Display the EASY SETUP settings
DVD-VR: To play the video programs on DVD-RAM or DVD-R/RW.
DATA: To play the data files on DVD-RAM or DVD-R/RW.
OFF
WAIT 5 MIN: If there is no operation for 5 minutes, the pictures turns grey. The
television screen would resume when you perform some operations. (This does not
work during video playback.)
RESET
The password screen is shown if "RATINGS" ( page 22) is set. Please enter the
same password and press [OK], then turn the unit off and on again.
15 SEC to 60 SEC
(in 5 unit)
60 SEC to 180 SEC
(in 30 unit)
23