Table of Contents
Advertisement
5. Are suitable plugs used to connect the aerial?
6. If you are in doubt, consult your dealer.
No sound
1. Has the TV been set to mute? To cancel mute,
press the "
" button, or increase the volume level.
2. Sound is coming from only one speaker. Is the
balance set to one extreme? See Sound Menu
section.
Remote control - does not operate
Your TV no longer responds to the remote control. The
batteries may be exhausted, if so you can still use the
control buttons on the TV. (* Is only possible if they
are not blocked by parental control.)
Input sources - can not be selected
1. If you cannot select an input source, it is possible
that no device is connected.
2. Check the AV cables and connections if you have
tried to connect a device.
Internet Connection Not Available / DLNA Mode
Not Operating
If the MAC address (a unique identifier number) of
your PC or modem has been permanently registered,
it is possible that your TV might not connect to
the internet. In such a case, the MAC address is
authenticated each time when you connect to the
internet. This is a precaution against unauthorized
access. Since your TV has its own MAC address,
your internet service provider cannot validate the MAC
address of your TV. For this reason, your TV cannot
connect to the internet. Contact your internet service
provider and request information on how to connect
a different device, such as your TV, to the internet.
It is also possible that the connection may not be
available due to a firewall problem. If you think
this causes your problem, contact your internet
service provider. A firewall might be the reason of a
connectivity and discovery problem while using the TV
in DLNA mode or while browsing via DLNA.
Invalid Domain
Ensure that you have already logged on to your PC
with an authorized username/password and also
ensure that your domain is active, prior to sharing
any files in your DLNA server program on your PC. If
the domain is invalid, this might cause problems while
browsing files in DLNA mode.
For any help concerning set up and use of your TV please call the Customer Helpline:
Internet Portal functionality
information
The content and services available through the
SmarTVue portal are provided by third-party providers
and may be altered, suspended or discontinued at any
time without notice. Hitachi is not responsible for any
of the content or services and does not warrant the
availability of or access to such content or services.
For information on a particular service or on any
content, please visit the service/content provider's
website. If you have any questions concerning, or
problems with, any content or services then please
contact the relevant service/content provider directly.
Hitachi is not responsible for providing customer
service in relation to content or services and accepts
no liability in this regard.
DVB-T functionality information
This DVB receiver is only suitable for use in the
country which it was designed to be used in.
Although this DVB receiver conforms to the latest DVB
specifications at the time of manufacture, we cannot
guarantee compatibility with future DVB transmissions
due to changes that may be implemented in broadcast
signals and technologies.
Some digital television functions may not be available
in all countries.
We continually strive to improve our products;
therefore, specifications may change without prior
notice.
For advice on where to purchase accessories,
please contact the store where you purchased your
equipment.
NB. The wireless dongle is especially matched to work
with your TV and can only be purchased from Argos.
To Program Your SKY Remote For
Your TV
1. Make sure your SKY box is connected to your
TV
2. Turn your TV and SKY box on
3. Press TV on your SKY remote control handset
4. Hold down SELECT and the RED button
together for about two seconds, until the red
light on the SKY remote blinks twice.
5. Key in 0065 on your SKY remote. The light on
the SKY remote should blink twice
6. Press the STANDBY button on your SKY
remote control. Your TV should now switch off.
7. Press SELECT again. The light on your SKY
remote control should now blink twice
You should now be able to control some basic
functions on your TV from your SKY remote control
(e.g. volume up/down, programme up/down).
English - 28 -
0345 604 0105
Advertisement
Table of Contents
Troubleshooting
