D-Link M15 Quick Installation Manual

Quick Installation Guide
M15
AX1500 Wi-Fi 6 AI Mesh System
(2 Pack/3 Pack)
INSTALLATION
1
Take the router labeled as "1" (label can be found on top of the
router) and plug it into a power source. Wait for the status LED
/
to flash orange.
2
Download the D-Link Ai app and launch it.
/
D-Link Ai
You're all good to go! Connect devices to your network using the Wi-Fi Name(SSID) and Wi-Fi Password that you created during the
setup process. Enjoy the Internet!
3
/
D-Link Ai
PACKAGE CONTENTS
• M15 || AX1500 Wi-Fi 6 AI Mesh System
• Power Adapter
• Ethernet Cable
• Quick Installation Guide
• Quick Installation Card
Tap Install New Device. Scan the Setup code on the Quick
Installation Card. Follow the on-screen instructions to complete
the setup.
Note: After the router (labeled "1") has been installed, follow the
app instructions to complete setup for the remaining unit(s) or
refer to the Quick Extender Setup section on the following page.
Quick Installation Card
"D-Link Ai "
SETUP QR CODE
Model Name: DEVICE
Wi-Fi Name: dlink-XXXX
Password: XXXXXXXX
S/N: 123456789