13. TECHNICAL INFORMATION................. 21 WE’RE THINKING OF YOU Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time.
ENGLISH SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
Put the cutlery in the cutlery basket with the sharp • ends pointing down or put them in the cutlery drawer in a horizontal position with the sharp edges down. Do not leave the appliance with the open door •...
ENGLISH 2.5 Service • If the water inlet hose is damaged, immediately close the water tap and • Contact the Authorised Service disconnect the mains plug from the Centre to repair the appliance. We mains socket. Contact the Authorised recommend only the use of original Service Centre to replace the water spare parts.
Salt container Cutlery basket Air vent Lower basket Rinse aid dispenser Upper basket Detergent dispenser 4. CONTROL PANEL On/off button Start button Program button Indicators Programme indicators Option button Display Delay button 4.1 Indicators Indicator Description Washing phase. It comes on when the washing phase operates.
Water Energy Duration Programme (kWh) (min) 14 - 16 1.2 - 1.5 139 - 155 12.5 - 14.5 1.4 - 1.7 159 - 169 1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of dishes can change the values.
Page 10
2. Press Option. • The indicators • The indicators are off. are off. • The indicator still flashes. • The indicator still • The display shows the current flashes. setting: e.g. = level 4. • The display shows the current –...
ENGLISH 7. OPTIONS If the option is not applicable to the Desired options must be programme, the related indicator does activated every time before not appear or it flashes quickly for a few you start a programme. seconds and then goes off. It is not possible to activate The display shows the updated or deactivate options while a...
Page 12
4. Open the water tap. 5. Turn the cap of the salt container 5. Start a programme to remove any clockwise to close the salt container. processing residuals that can still be CAUTION! inside the appliance. Do not use...
ENGLISH If you use multi-tablets and the drying performance is satisfactory, the rinse aid refill indication can be disabled. We recommend to always use rinse aid for better drying performance, also in combination with multi- tablets containing rinsing agent. 9. DAILY USE 1.
4. Set the applicable options. Cancelling the delay start while 5. Press Start to start the programme. the countdown operates • The washing phase indicator comes on . When you cancel the delay start you • The programme duration starts to have to set the programme and options decrease with steps of 1 minute.
Page 15
ENGLISH • You can use dishwasher detergent, 5. Adjust the released quantity of rinse rinse aid and salt separately or you aid. can use the multi-tablets (e.g. ''3in1'', 6. Activate the rinse aid empty ''4in1'', ''All in 1''). Follow the notification.
2. First remove items from the lower At the end of the program basket, then from the upper basket. water can still remain on the sides and on the door of the appliance. 11. CARE AND CLEANING WARNING! Before maintenance,...
Page 17
ENGLISH 3. Wash the spray arm under running water. Use a thin pointed tool, e.g. 7. Reassemble the filters (B) and (C). toothpick, to remove particles of soil 8. Put back the filter (B) in the flat filter (A). Turn it clockwise until it locks. from the holes.
11.4 Internal cleaning recommend running long duration programmes at least twice a month. • Carefully clean the appliance, • To maintain the performance of your including the rubber gasket of the appliance at its best, we recommend door, with a soft damp cloth.
Page 19
ENGLISH Problem and alarm code Possible cause and solution The appliance does not • Make sure that the sink spigot is not clogged. drain the water. • Make sure that the filter in the outlet hose is not clog‐ ged. The display shows •...
Page 20
For alarm codes not described in the table, contact an Authorised Service Centre. 12.1 The washing and drying results are not satisfactory Problem Possible cause and solution Poor washing results. • Refer to "Daily use", "Hints and tips" and basket loading leaflet.
ENGLISH Problem Possible cause and solution Traces of rust on cutlery. • There is too much salt in the water used for wash‐ ing. Refer to "The water softener". • Silver and stainless steel cutlery were placed to‐ gether. Avoid to put silver and stainless steel items close together.
Page 22
Water supply max 60 °C Cold water or hot water Capacity Place settings Power consumption Left-on mode (W) Power consumption Off-mode (W) 0.10 1) Refer to the rating plate for other values. 2) If the hot water comes from alternative source of energy, (e.g. solar panels, aeolian ener‐...