8.1.5 Perform Push Scan Using Jobs
Operate the unit as follows.
Note
•
If any documents are left in [Document List], Image Capture Plus cannot receive push scan data.
•
If the output destination is a computer connected via LAN, you can select a job from the top 10 jobs in
the job settings list.
1.
Touch the Favorite button (
2.
Depending on the output destination, touch [USB] or [PC].
•
If the output destination is a computer connected via USB.
•
If the output destination is a computer connected via LAN.
3.
Select a job.
•
If the output destination is a computer connected via USB, select the job after selecting the group.
•
If the output destination is a computer connected via LAN, select the job after selecting the computer.
).
8.1.5 Perform Push Scan Using Jobs
75