Table of Contents
Advertisement
Safety device in case of low ambient
temperatures
The appliance is equipped with a safety
thermostat to protect your wine against
a sharp drop in temperature. If the
external temperature should fall, a
heater element switches on
automatically to keep the temperature
inside as constant as possible. If the
ambient temperature continues to fall,
the appliance switches itself off
automatically.
Isolator plates for thermal separation
The appliance has two fixed isolator
plates which divide the cabinet into
three different zones. This enables you
to store up to three different types of
wine at the same time, e.g. red wine,
white wine and Champagne.
The isolator strips on the inside of the
glass door prevent an exchange of heat
between the individual zones.
The optimum temperature and air quality
Setting the temperature
The temperatures in the wine
conditioning zones can be set
independently of one another.
Touch the sensor for the zone for
which you wish to change the
temperature, so that it is highlighted
in yellow.
The current temperature for the
selected zone appears in the display.
Use the two sensors underneath the
display to set the temperature.
By touching the sensor
- The temperature decreases
- The temperature increases
Touch the OK sensor to confirm your
selection
or
Wait approximately 5 seconds after
the last touch of a sensor
The temperature being set will flash in
the display.
The following information shows in the
display while the sensors are being
touched:
25
Advertisement
Table of Contents
