Key Technical Specifications - Huawei FusionModule1000A40 Product Description

FusionModule1000A40 Prefabricated All-in-One
Data Center
Product Description (Advanced Configuration, 208
V)

2.3 Key Technical Specifications

Table 2-3 Key technical specifications
Item
System BOM number
Power supply Power input
and distribution
Surge protection level
Load power
Battery backup time
Cooling Cooling capacity
Refrigerant
Cold aisle
temperature control
range
Cold aisle humidity
control range
Fire Type
extinguishing
Alarm
Monitoring
Extinguishing agent
Monitoring Network camera
Management
functions
Structure Dimensions (H x W x
D)
Thermal insulation
Issue 03 (2021-02-10)
Specifications
21261316-003
Two 400 A inputs, three-phase four-wire + PE, 208 V
AC - 60 Hz
Second level surge protection, nominal: 30 kA (8/20
µs); maximum: 60 kA (8/20 µs)
Single cabinet power 7 x 6 kW/rack; total power ≤ 42
kW
10 min
25 kW/set, 3+1 hot backup
R410A
18–27°C
20%–80% RH
Fire extinguishing system with the automatic fire
detection and emergency gas release functions
Audible and visual alarming with automatic
monitoring and detection
The system releases the gaseous extinguishant if fire
alarms are generated from dual detector loops.
Heptafluoropropane.
Two-megapixel progressive scanning CMOS sensor
Monitors the internal temperature and humidity, the
fire detection and control system, the access control
system, the cooling system, and the power distribution
system in real time.
O&M using the mobile app, remote unattended
control
40 ft standard ISO shipping pre-fab. module: 2896 mm
x 2438 mm x 12192 mm
The overall heat transfer coefficient of the pre-fab.
module is less than or equal to 0.36 W/(m
Copyright © Huawei Technologies Co., Ltd.
2 Typical Application Scenarios and Typical
Configuration
2
·K).
7