Installing The Humidifier Water Inlet Pipe (With A Humidifier Hose) - Huawei NetCol5000-A050 User Manual

In-row air cooled smart cooling product
Hide thumbs Also See for NetCol5000-A050:
Table of Contents

Advertisement

NetCol5000-A050 In-row Air Cooled Smart Cooling
Product
User Manual

4.8.8.1 Installing the Humidifier Water Inlet Pipe (With a Humidifier Hose)

Bottom Pipe Routing
Step 1 Straighten the water inlet pipe delivered with the smart cooling product, and route
it from the inside to the outside through the water inlet hole at the bottom of the
smart cooling product.
Figure 4-72 Bottom routing of the water inlet pipe
Step 2 Clean the engineering pipes before connecting the water inlet pipe to the engineer
pipe to avoid impurities entering into the humidifier.
Step 3 Connect the water inlet pipe to the engineering pipe and wrap the pipe with
thermal insulation foam.
----End
Top Pipe Routing
When routing pipes from the top, do not route the pipes over servers or other
devices to protect them from being affected by pipe leaks.
Step 1 Straighten the water inlet pipe delivered with the smart cooling product, and route
it from the inside to the outside through the water inlet hole on the top of the
smart cooling product.
Issue 08 (2021-09-17)
NO TE
The other end is a reserved G 1/2 inch connector with inner screw threads. Connect the
other end to a hose or rigid pipe based on site requirements.
NO TICE
Copyright © Huawei Technologies Co., Ltd.
4 Installation
96

Advertisement

Table of Contents
loading

Table of Contents