ABB ControlMaster CM15 User Manual page 38

ControlMaster CM15
Universal process indicator
...Input/Output / ...Analog Outputs / ...Analog Output 1 (2)
Auto Eng Range*
Eng Low*
Eng High*
Polarity**
*Not applicable if Output Type is Digital or Source is None.
**Not applicable if Output Type is Analog or Source is None.
36
1
/ DIN
8
If enabled (On) the Eng High and Eng Low values for the output are set automatically to the
engineering range values of the source.
The minimum engineering range output value.
The maximum engineering range output value.
Sets the polarity of the output signal. If Negative, the output is energized when source is
inactive. If Positive, the output is energized when source is active.
7 Advanced Level
IM/CM/I–EN Rev. D