Table of Contents
Advertisement
Super IO Device configuration
Serial Port1 Address/ Serial Port2 Address: This option specifies the base I/O port address and the
Interrupt Request address of Serial Port 1 and Serial Port 2. Select Disabled to prevent the serial port from
accessing any system resources. When this option is set to Disabled, the serial port physically becomes
unavailable. Select 3F8/IRQ4 to allow the serial port to use 3F8 as its I/O port address and IRQ 4 for the
interrupt address.
ACPI configuration
Use this feature to configure Advanced configuration and Power Interface (ACPI) power management settings
for your system.
ACPI Aware O/S: Select Yes to enable ACPI support for an operating system that supports ACPI. Select No
to disable ACPI support for an OS that does not support ACPI.
ACPI Version Features: The options are ACPI v1.0, ACPI v2.0 and ACPI v3.0. Please refer to ACPI's website
for further explanation: http:// www.acpi.info/.
ACPI APIC Support: Select Enabled to include the ACPI APIC Table Pointer in the RSDT pointer list.
NOTE: Only available when ACPI is enabled on an ACPI-aware operating system.
APIC ACPI SCI IRQ: When this item is set to Enabled, APIC ACPI SCI IRQ is supported by the system.
Chapter 8
Figure 10-1. ACPI configuration
67
Advertisement
Table of Contents
