Table of Contents
Advertisement
7.3 Restoring the System Drive to the Factory-Shipped Condition
7.3.1 Procedure for restoring the system drive to the factory-shipped condition
Perform the following procedure to restore the system drive of an HF-W2000 Model 58/55/50 to its factory-shipped
condition by using a recovery DVD.
1.
Turn on the power to the equipment, and insert the recovery DVD "HITACHI HJ-205x-**** Product
Recovery DVD" into the DVD drive. If you have multiple recovery DVDs, insert the first disc (for example, if
you have two recovery DVDs, insert the disc numbered 1/2).
Note:
The underlined part is the model number of the equipment you purchased, and therefore the part
indicated as * differs depending on the model. In the following procedure, substitute the "HJ-205x-
****" with the actual model number of the equipment you purchased.
2.
When you boot from the recovery DVD, a confirmation message appears.
Note 1: If you cannot boot from the recovery DVD, turn off the equipment, and then turn it back on.
Note 2: For the B model, the following screen appears. Select Product Recovery Utility, and then and click
the Start button.
Note 3: For the B model, install drives in both drive bays.
If you click Shut Down, the following message dialog box appears. Click OK.
The recovery DVD is automatically ejected, and then the equipment automatically shutdown.
To return to the confirmation message window, click Cancel.
7. RESTORING THE FACTORY-SHIPPED CONDITION USING A RECOVERY DVD
7-3
Advertisement
Table of Contents
