Operation Mode Change; Operation Mode Change - Hitachi PSC-A32MN Operation Manual

7.6 Operation Mode Change
<Monitor (All Groups)>
(1)
(3) (2)
NOTES:
• By tapping "<" or ">" at the detailed setting screen, the operation mode will be switched to another group in the
same block.
Restricted (Run/Stop Only) : In case of "Enable", each Setting Change is for all Groups or Blocks.
• Control
Setting Change is not possible for each Group.
• Some operation mode cannot be set depending on the type of Air Conditioner Unit. Contact your dealer or go to
the inquiry counter of a designated maker for detailed information.
• If the settings are mixed when multiple groups are selected, the display will remain blank.
14
<Monitor (Block)>
(1)
(1) Select the target group at screen of
"Monitor (All Groups)" or "Monitor
(Block)" to change the operation
mode setting.
The pop-up of "Setting" for the
selected group is displayed on the
touchscreen.
(2) By tapping " " or " " at the
Operation Mode, it will switch in
order to "COOL", "HEAT", "DRY",
"AUTO" and "FAN".
COOL
HEAT
DRY
AUTO
FAN
* The "AUTO" (Heating/Cooling
Automatic Operation) will be
included as option if applicable.
(3) Tap "Monitor screen" to return to
Monitor screen.
P5415644